Teckwrap Pearlescent HTV - Mint

$3.00
(No reviews yet) Write a Review
Availability:
Usually ships in 24 hours
Adding to cart… The item has been added

TeckWrap Pearlescent Heat Transfer Vinyl

Sold by the sheet 12"x10"

Test cut is always recommeded 

HOW TO DO IT

  • Mirror/Reverse your image design.
  • Place vinyl (gloss side) onto cutting mat .
  • Adjust proper blade speed and cutting pressure .
  • Weed all of the excess slowly, leave the delicate design letters or graphics.
  • Make sure the finished product facing the right way once pressed onto your fabric.
  • Lay out the fabric. Place the t-shirt or fabric on a hard, flat clean dry surface.
  • Place parchment paper/teflon to protect transferred image onto both sides of t-shirt.
  • Set a heat press machine from 150℃(302℉) to 160℃(320℉) .
  • Press for 8-12 seconds at medium pressure.
  • Press on the vinyl gloss side. Do not use steam iron.
  • Disperse the iron's heat evenly. Be sure to consistently apply pressure so the complete image is fully attached and prevent scorching the paper and cracking the image.
  • Wait for the vinyl to COOL and gently peel off backing after few minutes.
  • If you notice slight lifting, place parchment paper over design and press again for 3-4 seconds