Teckwrap PU HTV - Pink

$2.75
(No reviews yet) Write a Review
Availability:
Ships in 3-4 days
Adding to cart… The item has been added

TeckWrap Regular PU Heat Transfer Vinyl

Sold by the sheet 12"x12"

Test cut is always recommeded 

HOW TO DO IT

  • Mirror/Reverse your image design.
  • Place vinyl (gloss side) onto cutting mat .
  • Adjust proper blade speed and cutting pressure .
  • Weed all of the excess slowly, leave the delicate design letters or graphics.
  • Make sure the finished product facing the right way once pressed onto your fabric.
  • Lay out the fabric. Place the t-shirt or fabric on a hard, flat clean dry surface.
  • Place parchment paper/teflon to protect transferred image onto both sides of t-shirt.
  • Set a heat press machine from 150℃(302℉) to 160℃(320℉) .
  • Press for 8-12 seconds at medium pressure.
  • Press on the vinyl gloss side. Do not use steam iron.
  • Disperse the iron's heat evenly. Be sure to consistently apply pressure so the complete image is fully attached and prevent scorching the paper and cracking the image.
  • Wait for the vinyl to COOL and gently peel off backing after few minutes.
  • If you notice slight lifting, place parchment paper over design and press again for 3-4 seconds