Info from Mr. Nola's website:
Looking for that oh so thick and glossy topcoat that adorns the surface of your favorite trend worthy tumblers? Need that look yourself, but are in a rush, then you have found your secret weapon. It’s totally doable with Mr. Nola’s Glitter Speed-Dry Epoxy.
We have worked diligently with our manufacturer Marabu, who have gone above and beyond, industry standards to formulate and certify our epoxy for use in your home and craft rooms.
Mr. Nola's Glitter Speed-Dry Epoxy is ASTM D-4236 Certified*.
Mr. Nola’s Glitter Speed-Dry Epoxy
Mr. Nola’s Glitter is proud to introduce our easy to use, low odor, professional-grade quick curing epoxy. As a “Maker” it was extremely important to Mrs. Nola to ensure that Mr. Nola’s Glitter Speed-Dry Epoxy was formulated to be the best quick curing epoxy for all types of tumblers. It was important that it could be used as a final coat. We knew that curating our very own quick curing epoxy was the only way to help ensure every color, glitter, and detail on your beautiful tumbler is showcased to its’ full potential. Since longevity of a custom tumbler is always a concern, we got you covered! Mr. Nola’s Glitter Speed-Dry Epoxy was engineered with UV inhibitors to prevent yellowing and provide long-term clarity and best of all it cures to a tough durable scratch resistant finish. Mr. Nola’s Glitter Speed-Dry Epoxy is dry to the touch in 2 hours and makes it perfect for the busiest of days when time may not be on your side. And best of all, CAN be used as your final coat.
Mr. Nola’s Glitter Speed-Dry Epoxy is great for layering and can be used as a final coat for your tumblers to protect and enhance decals, glitter, Marabu Easy Marble®, alcohol inks, geodes, wood grains, and more!
- FDA compliant Resin
- Conforms to ASTM D-4236
- Dry in 2-4 hours
- Full Cure in 72 hours
- Work Time 10-15 minutes
- Ultra Clear
- Self-Leveling
- Medium Viscosity
- Tough Protective Coating
- Waterproof
- Sandable
- Ideal For Layering
- UV-Resistant
- Low Odor
- VOC Free
- Heat Rated to 500 Degrees
MIXING INSTRUCTIONS
Mix ratio is 1:1. Mix one Part A (resin) to one Part B (hardener). Pour equal amounts of Part A and Part B into a flat-bottomed mixing container. Mix gently, stirring in one direction, while scraping bottom and sides of mixing container to ensure a complete mixture. Mix for 1-2 minutes or until mixture is clear. Pour immediately on your tumbler. Recommended working temperature should be above 73°F, and less than 60% humidity.
Due to the shorter work-time, the mixture will heat up and start to cure quickly and is not recommended for use with silicone molds.
Uncured resin cleans easily with acetone.
Pint set includes one 8oz bottle of Part A and one 8oz bottle of Part B= 16oz of Mixed Product
Quart set includes one 16oz bottle of Part A and one 16oz bottle of Part B= 32oz of Mixed Product
Half-Gallon set includes one 32oz bottle of Part A and one 32oz bottle of Part B= 64oz of Mixed Product
One-Gallon set includes one 64oz bottle of Part A and one 64oz bottle of Part B= 120oz of Mixed Product
*ASTM D-4236
WHAT DOES IT MEAN?
The American Society for Testing and Materials sets worldwide standards that help to improve performance and instill confidence in the safety of products around the world. ASTM D-4236 is specifically a federally regulated standard for the labeling of art materials for chronic health hazards. Any art material that is intended for home use, must be evaluated by a board-certified toxicologist for any potential threats the material may pose. If a product contains any material that is known to be dangerous in any way, the product must bear appropriate warnings.
After being evaluated, Mr. Nola’s Glitter Speed-Dry Epoxy, was found to conform to ASTM D-4236 when used as directed. This is great news for our customers, now pass a
Info from Mr. Nola's website:
For Tumblers, Artwork & Coating
We set out to do the impossible—make our ultra-premium SPEED-DRY epoxy resin even more beautiful, more durable and longer-lasting. And we did it. Our chemists spent the past year engineering its unique formula to offer even greater levels of performance. Artists who work with SPEED-DRY set themselves apart by delivering a thick, glossy topcoat with breathtaking clarity that lasts. Introducing the next generation of SPEED-DRY.
Easy-to-use, low odor, self-leveling, epoxy resin, with a tough, durable finish specially formulated for tumbler makers. Ideal for layering and can be used as a final coat. Not recommended for use with silicone molds. Engineered with UV inhibitors to slow natural ambering and provide long-term clarity. Touch dry in 2-4 hours. Full cure time 72 hours. Permanent and waterproof once fully cured. Resin (Part A) is FDA compliant resin. Scratch-resistant. Can be used with Marabu alcohol inks, glitter, pigments, and other colorants. Ultra-clear, sandable, heat tolerant medium viscosity, VOC free resin. Conforms to ASTM D-4236. Work time 10-20 minutes. Due to the shorter work time the mixture will heat up and start to cure quickly. Uncured resin cleans up with acetone.
Specifications:
Mixing Ratio: 1:1
Viscosity: Medium
Finish: Glass-like, crystal clear, scratch-resistant finish
UV Resistant: UV-resistant formula protects against yellowing
Heat Resistant: 500°F
Odor: Zero VOC, low odor
Application Temperature: 70-85°F
Working Time: 20 minutes @ 77°F
Tack-free Time: 2-4 hours @ 77°F
Time to Sand: 4-6 hours @ 77°F
Fully Cured (days): 3-5 days
Mixing Instructions:
Mix ratio is 1:1. Mix one Part A (resin) to one Part B (hardener). Pour equal amounts of Part A and Part B into a flat-bottomed mixing container. Mix gently, stirring in one direction, while scraping bottom and sides of mixing container to ensure a complete mixture. Mix for 1-2 minutes or until mixture is clear. Pour immediately on your tumbler. Recommended working temperature should be above 73°F, and less than 60% humidity.
Please note: additional shipping charges may apply, does not count towards $300.00 free shipping
