Direct-to-Film (DTF) transfers are full-color heat applied transfers for light and dark garments. No weeding or masking is required and DTF transfers can be applied to cotton, cotton/poly blends, and even 100% polyester.
DTF Transfer Application Instructions
- Preheat the garment for 5 seconds to remove excess moisture.
- Place the transfer on the shirt white side down, image facing up.
- Press at 285f for 15 seconds under very firm pressure.
- Remove the garment from the press and let it stand until it is cool.
- Cold Peel.
- Cover the image with parchment paper and press again for 15 seconds. You can also use a Teflon sheet, butcher paper, or tissue paper.
***Please note: If the film does not come off completely, stop peeling and repress with the image in place, let it cool, and re-peel the film.
Care Instructions: Turn the garment inside out. Machine wash cold. No bleach. No softener. Do not dry clean or iron. Tumble dry low.
Due to the many variations in monitors and browsers, colors may appear different on different monitors. Computer monitors are not all calibrated equally and color reproduction on the Internet is not precise.
With these factors in mind we cannot guarantee your transfers will match 100% from batch to batch or to the colors you see on your computer monitor. We do our very best to ensure all settings are repeated with each batch but please allow for some variances to occur.
**These settings are recommendations only and will greatly depend on your heat press. If you are not familiar with pressing DTF transfers, we recommend completing a few test presses to ensure the correct temperature, time and pressure for your heat press. Cricut easypress or other handheld presses not recommended
